seanhalle@36: # 
seanhalle@36: # Generated Makefile - do not edit! 
seanhalle@36: # 
seanhalle@36: # Edit the Makefile in the project folder instead (../Makefile). Each target
seanhalle@36: # has a pre- and a post- target defined where you can add customization code.
seanhalle@36: #
seanhalle@36: # This makefile implements macros and targets common to all configurations.
seanhalle@36: #
seanhalle@36: # NOCDDL
seanhalle@36: 
seanhalle@36: 
seanhalle@36: # Building and Cleaning subprojects are done by default, but can be controlled with the SUB
seanhalle@36: # macro. If SUB=no, subprojects will not be built or cleaned. The following macro
seanhalle@36: # statements set BUILD_SUB-CONF and CLEAN_SUB-CONF to .build-reqprojects-conf
seanhalle@36: # and .clean-reqprojects-conf unless SUB has the value 'no'
seanhalle@36: SUB_no=NO
seanhalle@36: SUBPROJECTS=${SUB_${SUB}}
seanhalle@36: BUILD_SUBPROJECTS_=.build-subprojects
seanhalle@36: BUILD_SUBPROJECTS_NO=
seanhalle@36: BUILD_SUBPROJECTS=${BUILD_SUBPROJECTS_${SUBPROJECTS}}
seanhalle@36: CLEAN_SUBPROJECTS_=.clean-subprojects
seanhalle@36: CLEAN_SUBPROJECTS_NO=
seanhalle@36: CLEAN_SUBPROJECTS=${CLEAN_SUBPROJECTS_${SUBPROJECTS}}
seanhalle@36: 
seanhalle@36: 
seanhalle@36: # Project Name
seanhalle@36: PROJECTNAME=prhash
seanhalle@36: 
seanhalle@36: # Active Configuration
seanhalle@36: DEFAULTCONF=Debug
seanhalle@36: CONF=${DEFAULTCONF}
seanhalle@36: 
seanhalle@36: # All Configurations
seanhalle@36: ALLCONFS=Debug Release 
seanhalle@36: 
seanhalle@36: 
seanhalle@36: # build
seanhalle@36: .build-impl: .build-pre .validate-impl .depcheck-impl
seanhalle@36: 	@#echo "=> Running $@... Configuration=$(CONF)"
seanhalle@36: 	"${MAKE}" -f nbproject/Makefile-${CONF}.mk QMAKE=${QMAKE} SUBPROJECTS=${SUBPROJECTS} .build-conf
seanhalle@36: 
seanhalle@36: 
seanhalle@36: # clean
seanhalle@36: .clean-impl: .clean-pre .validate-impl .depcheck-impl
seanhalle@36: 	@#echo "=> Running $@... Configuration=$(CONF)"
seanhalle@36: 	"${MAKE}" -f nbproject/Makefile-${CONF}.mk QMAKE=${QMAKE} SUBPROJECTS=${SUBPROJECTS} .clean-conf
seanhalle@36: 
seanhalle@36: 
seanhalle@36: # clobber 
seanhalle@36: .clobber-impl: .clobber-pre .depcheck-impl
seanhalle@36: 	@#echo "=> Running $@..."
seanhalle@36: 	for CONF in ${ALLCONFS}; \
seanhalle@36: 	do \
seanhalle@36: 	    "${MAKE}" -f nbproject/Makefile-$${CONF}.mk QMAKE=${QMAKE} SUBPROJECTS=${SUBPROJECTS} .clean-conf; \
seanhalle@36: 	done
seanhalle@36: 
seanhalle@36: # all 
seanhalle@36: .all-impl: .all-pre .depcheck-impl
seanhalle@36: 	@#echo "=> Running $@..."
seanhalle@36: 	for CONF in ${ALLCONFS}; \
seanhalle@36: 	do \
seanhalle@36: 	    "${MAKE}" -f nbproject/Makefile-$${CONF}.mk QMAKE=${QMAKE} SUBPROJECTS=${SUBPROJECTS} .build-conf; \
seanhalle@36: 	done
seanhalle@36: 
seanhalle@36: # build tests
seanhalle@36: .build-tests-impl: .build-impl .build-tests-pre
seanhalle@36: 	@#echo "=> Running $@... Configuration=$(CONF)"
seanhalle@36: 	"${MAKE}" -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .build-tests-conf
seanhalle@36: 
seanhalle@36: # run tests
seanhalle@36: .test-impl: .build-tests-impl .test-pre
seanhalle@36: 	@#echo "=> Running $@... Configuration=$(CONF)"
seanhalle@36: 	"${MAKE}" -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .test-conf
seanhalle@36: 
seanhalle@36: # dependency checking support
seanhalle@36: .depcheck-impl:
seanhalle@36: 	@echo "# This code depends on make tool being used" >.dep.inc
seanhalle@36: 	@if [ -n "${MAKE_VERSION}" ]; then \
seanhalle@36: 	    echo "DEPFILES=\$$(wildcard \$$(addsuffix .d, \$${OBJECTFILES}))" >>.dep.inc; \
seanhalle@36: 	    echo "ifneq (\$${DEPFILES},)" >>.dep.inc; \
seanhalle@36: 	    echo "include \$${DEPFILES}" >>.dep.inc; \
seanhalle@36: 	    echo "endif" >>.dep.inc; \
seanhalle@36: 	else \
seanhalle@36: 	    echo ".KEEP_STATE:" >>.dep.inc; \
seanhalle@36: 	    echo ".KEEP_STATE_FILE:.make.state.\$${CONF}" >>.dep.inc; \
seanhalle@36: 	fi
seanhalle@36: 
seanhalle@36: # configuration validation
seanhalle@36: .validate-impl:
seanhalle@36: 	@if [ ! -f nbproject/Makefile-${CONF}.mk ]; \
seanhalle@36: 	then \
seanhalle@36: 	    echo ""; \
seanhalle@36: 	    echo "Error: can not find the makefile for configuration '${CONF}' in project ${PROJECTNAME}"; \
seanhalle@36: 	    echo "See 'make help' for details."; \
seanhalle@36: 	    echo "Current directory: " `pwd`; \
seanhalle@36: 	    echo ""; \
seanhalle@36: 	fi
seanhalle@36: 	@if [ ! -f nbproject/Makefile-${CONF}.mk ]; \
seanhalle@36: 	then \
seanhalle@36: 	    exit 1; \
seanhalle@36: 	fi
seanhalle@36: 
seanhalle@36: 
seanhalle@36: # help
seanhalle@36: .help-impl: .help-pre
seanhalle@36: 	@echo "This makefile supports the following configurations:"
seanhalle@36: 	@echo "    ${ALLCONFS}"
seanhalle@36: 	@echo ""
seanhalle@36: 	@echo "and the following targets:"
seanhalle@36: 	@echo "    build  (default target)"
seanhalle@36: 	@echo "    clean"
seanhalle@36: 	@echo "    clobber"
seanhalle@36: 	@echo "    all"
seanhalle@36: 	@echo "    help"
seanhalle@36: 	@echo ""
seanhalle@36: 	@echo "Makefile Usage:"
seanhalle@36: 	@echo "    make [CONF=<CONFIGURATION>] [SUB=no] build"
seanhalle@36: 	@echo "    make [CONF=<CONFIGURATION>] [SUB=no] clean"
seanhalle@36: 	@echo "    make [SUB=no] clobber"
seanhalle@36: 	@echo "    make [SUB=no] all"
seanhalle@36: 	@echo "    make help"
seanhalle@36: 	@echo ""
seanhalle@36: 	@echo "Target 'build' will build a specific configuration and, unless 'SUB=no',"
seanhalle@36: 	@echo "    also build subprojects."
seanhalle@36: 	@echo "Target 'clean' will clean a specific configuration and, unless 'SUB=no',"
seanhalle@36: 	@echo "    also clean subprojects."
seanhalle@36: 	@echo "Target 'clobber' will remove all built files from all configurations and,"
seanhalle@36: 	@echo "    unless 'SUB=no', also from subprojects."
seanhalle@36: 	@echo "Target 'all' will will build all configurations and, unless 'SUB=no',"
seanhalle@36: 	@echo "    also build subprojects."
seanhalle@36: 	@echo "Target 'help' prints this message."
seanhalle@36: 	@echo ""
seanhalle@36: